Procedures

Procedures:

1. Draw and cut a circle into the side of one of the tennis ball canisters so the hole is big enough to fit the other canister on it.

2. Lay the second tennis ball canister on the hole you cut out in the first canister.

3. Use the protractor to measure a forty-five degree angle with the canisters.

4. Cut the tape and place it down the middle (so you have more tape).

5. Secure the top canister onto the bottom one with the tape.

6. Tape one of the lids (from one of the cans) to the bottom of the can (top can) on a flat surface and connected to the can.

7. Use the sharp metal end of the compass to put the ignition hole on the bottom right side of the combustion chamber.

End your final Product should look like this: